OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Duron(tm) processor ("AuthenticAMD" 686-class, 64KB L2 cache) 901 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 939032576 (895MB)
avail mem = 899694592 (858MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/19/02, BIOS32 rev. 0 @ 0xfb210, SMBIOS rev. 2.2 @ 0xf0800 (36 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 04/19/2002
bios0: VIA Technologies, Inc. VT8367-8233
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf94
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdee0/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11 12
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8233A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xa800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 PCI" rev 0x00
agp0 at pchb0: v2, aperture at 0xe4000000, size 0x10000000
ppb0 at pci0 dev 1 function 0 "VIA VT8366 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA Vanta" rev 0x15
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ral0 at pci0 dev 9 function 0 "Ralink RT2561S" rev 0x00: irq 5, address ff:ff:ff:ff:ff:ff
ral0: MAC/BBP RTFFFFFFFF, RF unknown
xl0 at pci0 dev 10 function 0 "3Com 3c905 100Base-TX" rev 0x00: irq 12, address 00:60:08:63:01:14
nsphy0 at xl0 phy 24: DP83840 10/100 PHY, rev. 1
rl0 at pci0 dev 14 function 0 "Realtek 8139" rev 0x10: irq 10, address 00:07:95:d7:7d:03
rlphy0 at rl0 phy 0: RTL internal PHY
pciide0 at pci0 dev 15 function 0 "Promise PDC20265" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using irq 11 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
viapm0 at pci0 dev 17 function 0 "VIA VT8233A ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 128MB DDR SDRAM non-parity PC2100CL2.5
spdmem1 at iic0 addr 0x51: 256MB DDR SDRAM non-parity PC2100CL2.5
spdmem2 at iic0 addr 0x52: 512MB DDR SDRAM non-parity PC3200CL3.0
pciide1 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide1 channel 0 drive 0: 
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide1: channel 1 disabled (no drives)
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: 
spkr0 at pcppi0
it0 at isa0 port 0x290/8: IT8705F rev 0x02
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ebc5 netmask ffe5 ttymask ffe7
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
ral0: timeout waiting for MCU to initialize
ral0: could not load 8051 microcode
ral0: timeout waiting for MCU to initialize
ral0: could not load 8051 microcode